EBC Brakes RedStuff Front Brake Pads for 991.1 Porsche 911 Carrera, Carrera S, GT3, Turbo and Turbo S [DP32144C]

EBC Brakes RedStuff Front Brake Pads for 991.1 Porsche 911 Carrera, Carrera S, GT3, Turbo and Turbo S [DP32144C]

EBC Brakes’ RedStuff is a premium NAO (non-asbestos organic) ceramic-granule-enhanced brake pad, designed for modern vehicles including hatchbacks, sedans, muscle cars, and now, trucks and SUVs under the 2022 ED Plus range. These ceramic pads are non-metallic, non-magnetic, and free from steel fibers, which are a common cause of brake dust and rotor wear. RedStuff pads meet rigorous ecological standards, containing no lead, nickel, copper, antimony sulfides, or asbestos, as indicated by their NAO classification. They carry the prestigious “leaf mark” with the highest N rating, ensuring superior environmental safety.

RedStuff is EBC’s premium low-dust option for fast street driving, suitable for cars, trucks, and SUVs under the ED range. The pads utilize aramid fiber ceramic particles instead of ceramic fibers, ensuring minimal environmental impact. Free from sulfides and lead, these pads are ECE R90 brake safety tested and approved. While some dust is inevitable, EBC pads eliminate the etching effect caused by steel fibers, instead using easy-to-clean aramid fibers like Twaron and Kevlar. RedStuff pads offer long wear and require a 500-kilometer bed-in period for full performance, aided by EBC’s proprietary brake-in surface coating for accelerated break-in. Tested by the UK Motor Industries Research Association (MIRA), RedStuff has demonstrated a 30% improvement in braking, reducing stopping distances by up to 50ft from 100mph.

Backplates & NRS Hooks

• EBC Brakes employs the NRS (nucap retention system), a proprietary bonding technology licensed from Nucap Industries. This system integrates bi-directional crescent-shaped projections into the pad’s backing plate for enhanced shear strength, increasing the pad-to-plate bond by up to six times. At EBC’s Northampton Pressworks facility, advanced presses and tools ensure the precision of this process. Heat-activated glue is also applied to non-stainless backing plates to seal surfaces, further strengthening bonds and preventing corrosion.
  • 100% asbestos-free, eco-friendly pad compounds researched and blended at EBC Bristol
  • High strength adhesive interlayer for enhanced sealing and bond strength
  • NRS hooks “grab“ the friction material and completely stops any pad debonds

Performance

• EBC RedStuff is popular for two key reasons – its ability to reduce dust by 60-90% and its exceptional braking performance. The minimal dust it produces is easy to clean, as it contains no steel fibers. Additionally, RedStuff pads deliver excellent initial bite and improve further with heat.

Technical Information

• As a hard-wearing pad, RedStuff requires a longer bed-in period of up to 1,000 miles to conform fully to the disc surface. However, it is an impressive fast-road option for repeated heavy braking, emitting significantly less dust than semi-metallic pads. Proven to reduce stopping distances by up to 13m compared to OEM pads, RedStuff features EBC’s Brake-In surface coating for faster bed-in and improved rotor conditioning. With a nominal friction coefficient of 0.5 and ECE R90 compliance, these pads combine performance and safety with minimal dust output.

Features

• RedStuff ceramic brake pads
• Material is an aramid fiber-based brake compound enhanced with ceramic particles
• EBC lowest dust fast street pad with 15% brake improvement
• Capable of repeated heavy brake use without brake “fall-off”
• Very minimal disc / rotor damage characteristics
• Superb material for prestige imports / European and Asian cars
• ECE R 90 type approved for most cars
• Features red “brake in’ surface coating for instant safe braking after install
• Made with Nucap NRS hooks on backplates to totally eliminate the chance of pad debond
• Sold as a front set (4 pads)

Specifications

• Dust Rating: Low
• Cold Friction: Good
• Hot Friction: Excellent
• Life Time: Good
• Race Use: No

Applications

• Porsche 911 Carrera: 991.1 (2011-2016)
• Porsche 911 Carrera 4: 991.1 (2012-2016)
• Porsche 911 Carrera 4S: 991.1 (2012-2016)
• Porsche 911 Carrera S: 991.1 (2011-2016)
• Porsche 911 GT3: 991.1 (2013-2016)
• Porsche 911 Turbo: 991.1 (2013-2016)
• Porsche 911 Turbo S: 991.1 (2013-2016)

Notes

• Only compatible on vehicles equipped with cast iron rotor
• Not made for truck or SUV fitments

About EBC Brakes

EBC Brakes, an independently owned and managed leader in the brake industry, employs a global workforce of over 400 people. The company takes pride in its customers, products, success, and team. Offering the largest range of brake pads and discs in the world, EBC Brakes produces over 5,000 part numbers to suit virtually every type of moving vehicle. Manufacturing takes place in two specialized factories located in the UK and USA, with the majority of its brake discs and rotors produced in the UK.